Skip to content
150/325 ml Standart stainless steel bottles
260 ml Insulated stainless steel bottles

Cleaning

Before first use, disassemble and clean the product. Place the stainless steel and silicone top components in boiling water for 5 minutes. This is to ensure hygiene. Do not boil printed sleeves as this could cause damage to the printing. Before each subsequent use, clean carefully, fully disassemble and remove the silicone top and sleeve. Clean using warm water, mild soap, and a bottle brush. Thoroughly flush with clean water to remove any soap or food residue.

Top Rack Dishwasher Safe. Electric Sterilizer safe. Do not use microwave sterilizers for any metal parts.

While cleaning silicone nipples, spouts, straws, or other tops, be careful not to damage the drink holes or vents. Do not turn nipples inside out.

Caution: After cleaning or sterilizing do not touch hot bottles with your bare hands.

Additional Care Instructions for Nipples, Spouts, and Straws

Inspect the nipple (feeding teat) and all other silicone mouthpieces or tops before each use. Pull the feeding teat, other silicone mouthpieces, and tops in all directions. Throw away at the first signs of damage or weakness.

Do not leave a nipple (feeding teat) in direct sunlight or heat, or leave in disinfectant (“sterilizing solution”) for longer than recommended, as this may weaken the nipple (teat).

Silicone can be damaged by teething. Inspect the opening of all drink components for loose silicone. Replace when worn, torn, or if there is loose silicone.

Instructions For Use

Once clean, add the desired liquid to the bottle. Pull the nipple, spout, or straw through the metal collar and screw the collar onto the bottle. (Do not over-tighten to allow for ventilation). Before feeding, always check the liquid temperature by testing it on your wrist. If using Pura Natural Vent Nipples™, keep the nipple vent hole up and in line with the child’s nose while feeding. The “Pura” logo on the nipple will be down, by the child’s chin. This will ensure the anti-colic venting works as designed.

For warm milk, the milk must be warmed before pouring it into the insulated container. Feed warmed milk immediately and throw away unused milk within 1 hour. Never put the metal bottle in a microwave.

Never give a child liquid at a temperature above 99°F / 37°C and, as a precaution, always test on your wrist before feeding. 

Pura Bottles & Nipples Support Infants

Our Natural Vent Nipples™ support nursing and bottle-fed babies with a shape that promotes a superior seal between baby and nipple and a flow rate that simulates and supports breastfeeding. A one-piece vent system helps prevent colic. Milk stored in Kiki bottles is protected from exposure to light, preventing the breakdown of important proteins and nutrients. 

All Pura silicone components are crafted from medical-grade silicone. Silicone is a natural material; it does not contain any plastic, latex, or BPA. 

Do not freeze the insulated bottles.

For your child’s safety and health WARNING!

Continuous and prolonged sucking of fluids will cause tooth decay.

Always check food temperature before feeding.

Throw away silicone components at the first signs of damage or weakness.

Keep components not in use out of the reach of children.

Never attach to cords, ribbons, laces, or loose parts of clothing. The child can be strangled.

Never use feeding teats or spouts as soothers.

Always use this product with adult supervision.

Children should never walk or run while drinking from a bottle.

Accidents may occur when babies are left alone with drinking equipment due to the baby falling or if the product has been disassembled.

Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle/ cup for long periods through the day and particularly through the night, when saliva flow is reduced or if it is used as a soother.

my-my™

Cleaning 

Before first use, disassemble and clean the product and then place the components in boiling water for 5 minutes. This is to ensure hygiene. Before each subsequent use, clean carefully to ensure hygiene and sterilize, if desired. Clean using warm water, mild soap, and a bottle brush. Thoroughly flush with clean water to remove any soap or food residue.

 Dishwasher safe. Electric sterilizer safe. Caution: After cleaning or sterilizing do not touch hot bottles with your bare hands.

Instructions For Use

Once clean, add the desired liquid to the cup.

For your child’s safety and health WARNING! 

  • Always use this product with adult supervision.
  • Never use feeding teats as a soother.
  • Continuous and prolonged sucking of fluids will cause tooth decay.
  • Always check food temperature before feeding.
  • Keep components not in use out of the reach of children.
  • Throw away at the first signs of damage or weakness.
  • Due to strangulation hazards do not extend cords or loops.
  • Never attach to cords, ribbons, laces, or loose parts of clothing. The child can be strangled.
  • For use with Breast Milk only.
  • Not to be used for mixing formula milk. 
  • Never give a child liquid at a temperature above 99°F / 37°C and, as a precaution, always test on your wrist before feeding.
  • Straws are not suitable for a child under 6 months.

Straw Cup Installation

Installation Tip:  Kink the tip of the straw while pushing the lid down to avoid spills when installing the top. 

See a 15 second video HERE.

Drawer Title
Similar Products